Simultaneous 3-axis testing has several unique advantages compared with vibration testing in one axis at a time. The primary advantages include, but are not limited to, the ability to reproduce a real-world environment identical to what the product sees in the field, and significant setup and test time savings compared to individual single-axis testing.
Read MoreIn June 2020, the Sentek Dynamics’ Field Service Team completed a relocation and recommissioning service on a model L0620M-PAS106-LST400M/AAC/AIF/DMF vibration testing system.
Read MoreElectromechanical actuators are used to control the movement and position of various control surfaces on aircraft. Aircraft flight control surfaces allow the adjustment and control of aircraft flight altitude. Electromechanical actuators are critical components that undergo rigorous safety and reliability testing.
Read MorePID control is a very simple and powerful method for controlling a variety of processes, including temperature. The acronym PID stands for “Proportional, Integral, and Derivative”.
Read MoreA dual 120 kN shaker system was professionally installed this week at a customer’s site. The model installed was a H12056A-PA3130-LST1000M/AAC/MGB/CU-3/CIP vibration test system, which is a 26,437 lbf water-cooled vibration testing system with 2 inch pk-pk displacement, a low-pressure magnesium horizontal slip table, an air-cooled power amplifier, water-cooling unit, interconnecting cables, and hose.
Read MoreIn addition to new vibration testing systems available for immediate delivery, Sentek Dynamics has accepted several trade-ins from existing customers needing additional capacity. Used 50 kN (11,000 lbf) and 65 kN (14,300 lbf) systems were recently added to our inventory.
Read MoreWednesday, 20 May 2020 - Sentek Dynamics, headquartered in Santa Clara, CA is pleased to announce their new Bench Top (BT) Series of shaker systems. The systems range in size from 100 N (70 lbf) to 1000 N (224 lbf). Systems 400 N (99 lbf) and smaller are permanent magnet shakers and use lightweight rare earth magnets, making these systems easy to handle and portable. There are three versions of the BT Series of shakers: the BT, BT-M and BT-MTH.
Read MoreApril 21, 2020 – Sentek Dynamics is excited to announce that shipments of vibration testing systems from our North Carolina product demonstration, assembly, and service facility will begin in earnest in June 2020.
Read MoreMultiple-Input Multiple Output (MIMO) Testing has gained a huge momentum in the past decade with the development of multiple shaker table systems, the availability of MIMO vibration control systems, and the readiness of standards (e.g., MIL-STD 810G Method 527, IEST DTE 022 Working Group Recommendation).
Read MoreVibration testing has been performed since the 1860’s and in recent decades, single shaker vibration testing has been performed for all types of industries and contributed significantly to the progress of modern industries. Many products have been qualified to survive their launching, operating or transportation environmental conditions mainly through single shaker vibration control testing.
Read More
![Relocation and Recommissioning of a 6 kN [1340 lbf] Shaker](https://images.squarespace-cdn.com/content/v1/5526e8e7e4b0356ed20c43fe/1598559179295-G4KTZ6RYO5AR3ETJ19Q1/Final+Location.jpeg)
