Specifications/Standards Applicable to Sentek Dynamics’ Vibration & Environmental Testing Systems
| Testing Standard | Description |
|---|---|
| MIL-STD-810 | Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests |
| MIL-STD 167 | Department of Defense Test Method Standard – Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally-Excited) |
| ASTM D999-01 | Standard Test Methods for Vibration Testing of Shipping Containers |
| ASTM D3580 – 95 (2010) | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
| ASTM D4728 – 06 | Standard Test Method for Random Vibration Testing of Shipping Containers |
| ISO 2247:2000 | Packaging – Complete, filled transport packages and unit loads – Vibration tests at fixed low frequency |
| ISO 8318:2000 | Packaging – Complete, filled transport packages and unit loads – Sinusoidal vibration tests using a variable frequency |
| ISO 9022-10:1998 | Optics and optical instruments – Environmental test methods – Part 10: Combined sinusoidal vibration and dry heat or cold |
| ISO 9022-15:1998 | Optics and optical instruments – Environmental test methods – Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold |
| ISO 9022-19:1994 | Optics and optical instruments – Environmental test methods – Part 19: Temperature cycles combined with sinusoidal or random vibration |
| IEC 60068-2-64 | Environmental Testing Part 2: Test methods – Test Fh: Vibration, broadband random and guidance |
| EIA-RS-186 | Standard Test Methods for Passive Electronic Component Parts. IEC Publication 68: Basic Environmental Test |
| JIS C 0040:1999 | Environmental testing Part 2: Tests – Test Fc: Vibration (sinusoidal) |
| MIL-STD-202 | Electronic and Electrical Component Parts |
| MIL-STD-750 | Test Methods for Semiconductor Devices |
| NAVMAT P-9492 | Navy Manufacturing Screening Program that provides guidance concerning the use of temperature cycling and random vibration as manufacturing screens for defects in both parts and workmanship. |
| RTCA DO-160 | Section 8 Vibration |